|
Speed and precision also on great dimensions.
- loader for staples type PV or NP (depending on your needs, interchangeable)
- automatic device to set staples up to 10 different positions (adjustable)
- working cycle completely automatic
- selectors to set from 1 to 4 staples (one behind the other) in each preset position
- automatic horizontal clamp
- adjustable fence
- fence to be set at 45° - 30° - 22,5° - 15°
- possibility to memorize up to 520 working cycles
- safety shield
- air-oil filter
- A008q Extension table
- A030e Hydraulic vertical clamps
- MA01k large main joining cylinder (d. 100mm instead of 80mm)
- MA12 Additional air tank
- MA24g Hydraulic cylinders with standard hold down clamps instead of the mechanic vertical clamps
FEATURES
- SIGMA 2000 is the ideal machine for the framer working with medium/high volume production framing
- Especially designed for joining medium/wide mouldings
- 500 programmable positions and stack sequences
- SIGMA
2000 is highly flexible and suits any type of moulding shape, finishing
and wood quality. Once the frame is firmly clamped the sliding head can
be moved for inserting the staples in the requested positions
- 35 years of industry knowledge and experience
- Can
take and stack PV nails for soft, medium-hard woods (suitable
especially for picture framers) or NP nails for hard woods and MDF
(suitable for furniture and door applications)
- Built to withstand any production rate
- Adjustable guide
- Horizontal clamp
- Extra support arms available
|
TECHNICAL INFORMATION
Moulding size (width/height): Min (PV)4x7 - Max 120x70mm
Staples sizes:4-6-8-10-12-14mm
Staples loader capacity: 400 staples
Firing positions: 10
Programmable memory: 500
Air consumption: 40Nl/cycle @ 6bar
OVERALL DIMENSIONS
Height: 70 cm
Width: 90 cm
Depth: 130 cm
Weight: 140 kg
|
Note: colors and technical datas on these sheets can be changed at any time, without notice.
|
AUT2100