|
Double miter saw with automatic adjustable angles.
- 2 saw blades type HM d. 380mm, size bore d. 32mm
- 3 moulding supporting arms l=1000mm (1 right, 2 left)
- Adhesive measuring system l=1000mm
- Right sliding stop
- Vertical pneumatic clamps
- Air filter
- Independent saw blade angle movement
- Clamping timing device
- T001 Kit to place foot operated valve (available only in the countries where this system is allowed)
- T002a Moulding supporting arm l=1000mm with leg
- T005h Mechanical sliding measuring stop
- T009a Moulding supporting arm (l=1000mm) with leg, measuring system (l=1000mm) and aluminium extension guide
- T009g Aluminium extension guide (l=1000mm)
- T017 Special right clamp to hold pieces shorter than 50mm (2") during cutting operation
- M014 Pneumatic sliding measuring stop
- M056 Internal light device (24V)
FEATURES
- Cuts at 45° - 22°30' (or 30°) and 0° each head
- Angle changing with the turn of a switch
- swinging cutting heads
- Pneumatic vertical clamps
- Alu or timber application
- 400-500 cuts x hour
- Ergonomically friendly design
- Three phase power supply
- Pneumatic and electrical safety switches
- Adjustable blade speed motion
- Direct read off measuring scale
- Quick and easy adjustment between profiles
- Independent heads motion
- 100mm extraction dust
- Full visibility while cutting
- Activated by hand controls for safety
- Fixed fence
|
TECHNICAL INFORMATION
Operation: electro-pneumatic
Maximum cut width/height (at 45°): 100/65mm
Maximum cut width/height (other °): 105/65mm
Blade size: d. 380mm
2 x 2hp motors
Standard voltage: 400V 50Hz 3phase
OVERALL DIMENSIONS
Height: 1300mm
Length: 970mm
Width: 1250mm
Weight: 395 Kg
|
Note: colors and technical datas on these sheets can be changed at any time, without notice.
|
C16